CS-07 | DTF Transfer Powder | Specialty Fabric DTF Hot Melt Powder

CS-07 is a specialty DTF hot melt powder developed for specialty and coated fabrics where standard powders may not bond reliably. It is commonly used for fabrics with waterproof / oil-proof / anti-fouling finishes and other difficult materials. Pre-production testing is strongly recommended to confirm stability before mass production.

DTF Adhesive Powder Parameters

Basic Information

Model: CS-07
Product name: Specialty Fabric Heat Transfer Powder
Material/Composition: TPU

Particle & Melting

Particle size: 80–160 μm
Melting point range: 120–130°C

Recommended Application Settings (Starting Reference)

Press temperature: 160–170°C
Press time: ~12 seconds
Pressure: ~4 kg (adjust based on press type and fabric)

These are starting references. Final settings depend on fabric coating, film type, ink amount, and your equipment.

Product Features

Developed for three-proof fabrics to support deeper penetration and stronger bonding
Designed to work in harsher environments with moisture-resistance direction
Compatible with a wide range of specialty and coated materials
Recommended to run a pre-production test for stable mass production

Storage

Store in a sealed container/bag
Keep in a cool, dry, well-ventilated place
Avoid humid areas to prevent clumping
Keep away from heat sources and open flames

Get wholesale pricing from C-SILVER

Send your requirements (film/ink/powder), specs, destination, and estimated volume — we reply within 24 hours.